Lady350's Blog

Reviews, Entertainment, and more!

Archive for the category “Auto”

Chevrolet 3800

The Chevrolet 3800 was made by Chevrolet South Africa and was marketed in the period from 1972 to 1978. It was a 3800 Sedan type executive car for a mid-size or large family. As a standard Sedan type car it had four-door and rear-wheel drive.

The engine used in it was GM Chevrolet Generation 3 type which was a petrol run spark-ignition 4-stroke engine. The gearbox was a three-gear GM Turbo Hydromatic. The Chevrolet 3800 used 185 SR 14 model type tires. This model was 4,607 mm in length, with a wheelbase of 2,668 mm. The fuel tank capacity was 70 liter.

Chevrolet used a carburetor type fuel system in this model, with 2 valves per cylinder, and Rochester as an additional feature. Chevrolet used six-line cylinder alignment in this model. The displacement was 3,768 cc. It had a net power of 78 kW with a torque of 278 Nm.


Chevrolet 1700

The Chevrolet 1700 was produced by GM Daewoo, which was known as GM Korea at that time. The Chevrolet 1700 can be identified as the Korean version of LJ Torana, the car made by General Motors Holding’s GM Australia in 1967.

GM Korea marketed the Chevrolet 1700 from the year 1972 to 1976. The basic model of the Chevrolet 1700 was available as a five-door station wagon. It was powered by a 1,698 cc four-cylinder engine. Despite such changes from the initial model, it failed to draw much public attention, as its fuel consumption was too high, representing the main drawback which resulted in only 8,105 units produced.

It was also available as two-door and four-door sedan, and the engines were different according to the model. Some of the available configurations of that time included up-grades of the 1700 model as the OHV I4 with 1.2L, 1.3L, 1.6L and 1.8L engines, and also the OHV I6 with 2.25L, 2.85L and 3.3L engines. These added models were able to draw public attention despite the discussed high fuel consumption.

Dacia front bumper protectors

Dacia is an automobile company that comes from Romania, which was started to cooperate with Renault in the year 1966 and their main factory, was established in the year 1968 in the place named Colibaşi, which is known now as Mioveni that is near in Piteşi Romania. This automobile company continues their way in strategies, which was founded in an original business model “at the low price” with all the decision regarding the concepts and engineered; the production and commercializing the products has its starting point, which is the value of its clients. In this kind of strategies, the costs are reduced, if the following principles are respected and the result of their strategies matches the clients that they’re looking for. In a reasonable and acceptable price, with its wide range, modern and reliable concepts, the company represents itself as a generous and ingenious brand because of its products that offers records of interior space with an affordable price and the range of an attractive vehicle that fits for the practical customers. However, this company goes international in the same objective that to produce a range of vehicles, which robust, reliable and affordable domestic and foreign customers with its Renault quality standards.

Since Dacia’s objective to produce the right need of a client, it’ll need a front bumper protector that fits the vehicles protection which prevents its damage to the vehicle. It’s not new for a car owner to have minor damages to the vehicle and it can be prevent by using this bumper protector, which is place at the frontal edge of the vehicle. It’s made from a high quality material that passes the standard for protecting the vehicle against bumping in car parking. This is a very useful accessory that fits the need of Dacia vehicles. Moreover, it is designed for an eye-catching Dacia front bumper protectors to avoid bumping scrapes for a new look of a 4×4 Dacia.

4×4 car mats

Nobody will remain calm after the moment when we find out that there is a huge amount of mud inside his truck in the place where we put our feet. It’s very frustrating and this happens especially when we are talking about villages and areas where the mud is the most common thing. But, don’t be devastated and disappointed because this article will provide the best solution for you and your pocket.

The rubber car mats are the best option for problems such as this because as I said, they are made from rubber, which makes the cleaning easier and faster from the car mats created from carpet and the mud that you bring in with your feet is stuck on the car mat. The car mats are with “tray” design and the mission of this characteristic is to trap the water, mud or snow that you bring in from outside. There are many varieties of car mats and their sizes. On the market, you can find front mats 70cm x 50cm and 2cm deep tray and the outside the outside edge of the mat can be trimmed to fit perfectly to the footwell shape of the truck. The rear mats are usually 50cm x 50 cm with 2cm deep tray and they are available as four mat set, two front mats and two rear mats.

We can’t exclude the possibility that you can find car mats, which are waterproof and stain resistant and the car mats specially designed for off-road driving that match perfectly with your SUV or 4×4. The car mats are designs, which drain the water away from the pedals into the specific mat area that has the opportunity to hold up to a half liter of water or any kind of liquid. The best way to keep your truck clean and without mud is to use this option.

Skoda Rear Bars

                 The top priority of a car owner has to be the protection of the vehicle. The rear or back side of a car is vulnerable and requires special attention in terms of protection. In most collisions, it is the rear portion of the car that gets severely damaged, so it goes without saying that the rear portion needs special attention indeed. Rear bars provide the required protection to the rear of a vehicle. Rear bars are fitted just where the rear portion ends. Being fitted in that position the rear bars provide protection to the back of the car in case of any collision. The rear bar absorbs the pressure, if any, created by a collision. The rear bars also give somewhat of a protection to the back wheels of a vehicle.

                Skoda, the subsidiary of the Volkswagen group since 2000, produces some of the best rear bars for Volkswagen branded vehicles. Made with tough aluminum, Skoda 4×4 rear steps boast of providing the best protection to the vehicle in times of any unnatural and unwanted incidents. Skoda rear bars also provide an attractive look to the rear side of the car. Having a shining finish on the outer side, it does its best to give appeal to the vehicle. Skoda rear bars are cheap and are of high quality. Vehicles of other brands can also be fitted with Skoda rear bars. As the provider of best of protection these rear bars are currently in huge demand. Skoda rear bars should be installed by an expert to avoid any mishap in the future.

                As the rear of a vehicle is subjected to most of the damage, therefore a car owner should do his or her best to ensure the protection and safety of the rear and this can be aptly done by installing rear bars in the vehicle.

Daihatsu body side molding kit

Side moldings are a very popular accessory for motor vehicles that provide extra protection and a sleek finishing touch. Installing side moldings to your ride will dramatically reduce the chance of dings, as well as provide protection from scratches and nicks cause by harmful road debris. You can buy a complete molding installation for just about any vehicle, even specialty cars like the Daihatsu. While finding and installing parts onto your Daihatsu may be a hassle, you can add side moldings to your vehicle with your own hands in less than ten minutes.

Each Daihatsu body side molding kit comes with everything you need to give your car that extra protective edge. A set of moldings are provided for installation on each side of the car—the left, right, front, and rear body. The kit also includes Pro-Clean prep pads, Pro-Bond adhesive promoter, and a simple set of instructions. That’s all you need to be on your way to safer cruising!

Attaching side moldings to your Daihatsu is an easy, sweat-free process. Simply follow the directions below:

  • Prep your vehicle by wiping down application area with Pro-Clean prep pads.
  • Spread a thin layer of Pro-bond adhesive promoter to improve the adhesion of your side moldings by 200%
  • Align molding up to the appropriate side of your vehicle, make note where the edges come in contact.
  • Slowly adhere molding to your Daihatsu.
  • Repeat remaining three sides.

You can purchase genuine Daihatsu side moldings from your local dealer at factory pricing, but cheaper kits can be found at a number of online automotive dealers. When searching for a Daihatsu side molding kit online, be sure to do your research and check your facts to ensure you receive only quality product. Check to see if the website offers a warranty or money-back guarantee with your purchase.

Happy cruising!

4×4 mud mats

Floor mats are essential for protecting the foot wells of the 4×4 vehicle from becoming dirty and worn. All rubber floor mats are functional, extremely hard-wearing and perfectly suited for virtually any use it makes for the 4×4 Nissan cars.

The new Nissan floor mats are fully tailored rubber for car has manufactured from virgin natural rubber band, chosen specially for automotive purposes, tailored precisely to fit the foot wells for Nissan vehicles. It is designed with anti-slip under face ensuring the mats remain secure position and to look both impressive. It also offers a high durability in all conditions and climates. Heavy duty properties of the car mats are just simple like keep it clean with a damp cloth. This is designed to provide the original Nissan mats quality with integral fixation system to fit the car and the heel pad.

The 4×4 mud mats are designed to assists to trap and centralize the dirt, keeping the rest of the car tidy. It is an advanced surfacing that minimizes the fluid movement and it’s easy removed once they are trapped. These mats are high density triple extended material with its rigid core strength surface friction. It protects carpet in all seasons. Deep sculpture groove and special outer rim trap and hold slush, melting snow and mud away from shoes and off the carpet. It holds 1 – ½ quarts of water without spilling. Non-stick finish makes clean up a breeze.

With these is an excellent appearance and material for the car. It’s also an excellent quality for the heavy duty mud mats well for 4×4 that will give a long protection. Keeping the foot well of your vehicle pristine. The purpose of these floor mats for the car is not only for protection, it’s also to make the car more stylish and making it more comfortable for the passenger to ride in it. It makes no worries when it gets dirt inside the car.

4×4 Ford Ranger Bull Bars


The 4×4 Ford Ranger bull bars are manufactured by Aries automotive and it’s constructed in 3 inches tubular stainless steel. Because its stainless steel, it will not get rust easily. Available in two finishes; the polished stainless and the black powder coated (bar only skid-plate polished stainless on both options).

Ford Ranger bull bars are one set of an armor that’s strength and its matches the style of the car. It is available with all varieties of style. These bull bars are specially designed to fight back against costly damage to its front end. From surprise encounters with sharp rocks to unavoidably careless drivers, there are lots of damaging enemies that threatens the front end. Bull bars are layer of protection as needed. It’s a custom designed bull bars that fits perfectly into a 4×4 Ford Ranger vehicle. It is designed for an optimum strength and approach angle. It’s an easy auxiliary light mounting. It has a rugged appearance that appeals to an active lifestyle.

There is also this other kind of bull bar that fits to 4×4 ford ranger. A deluxe bull bar is also fits for this vehicle. It has it wing design that fold upswept and a release indicators for protection against road debris that could damage them. It also has its steel uprights that supports the outer frame and finished with cover straps to ensure that there are no exposed sharp edges. It has also this part that will secure mounting points to deal for IPF driving lights. It has its winch compatibility that properly supported structure of winch bull bars that is designed to accommodate the stresses of winching. With these bull bars the suits for the 4×4 Ford Ranger it’s more stylish and more protection to its frontal end. No worries when on off-road or on road and it provides good approach angles.

Citroen Side Mouldings

Side body molders of a car are bar type molders used to prevent you side doors’ dings i.e. unusual sound produced by doors. These are designed in such a way that they do not rub down the look of your vehicle as they are available in different styles and shapes and colors for different vehicles.

Citroen Motors offers these set of molders including each for each door. These side moldings are different for every vehicle of Citroen and also specific for different models of these Citroen Vehicles and are available in different colors and designs.

Citroen Side Mouldings will protect your vehicle from door dings, scratches, and other possible road hazards. These sets of 4 pre-measured side mouldings are custom painted to match your factory OEM paint. Each body side molding kit comes with complete and detailed installation instructions which are easy to follow for most consumers. Pro-clean prep pads and pro-bond adhesive promoter are also included, making the installation as quick and easy as possible.

The main advantage of these side molders is that you do not have need to be expert to attach this to your vehicle as these are easy to fit on your car. OEM Factory Original Equipment approved materials are used in these molders for outstanding performance and reliability.

Some Citroen dealers also offers touchup paint pen with these side body moldings to better fix these moldings with your car’s body. Sometimes people think it to be harmful for the body of their car. People of such class believe that when you in future remove these moldings then this may leave marks and other drawbacks on the body snatching original paint and shiny look of your car, but this is just their imagination as these Citroen side Body Moldings are easy to remove without leaving any hall marks.

Mitsubishi Trucklok

                Having a vehicle has always been every person’s dreams. After fulfilling this dream and owning a vehicle most of us forget to give attention to its protection and security features. However these are the most important attributes that should be taken care of first and foremost. A trucklok is such a feature which is bound to get the tension regarding security of your vehicle out of your head. Trucklok is a special type of device which is used for locking the tailgate of the 4×4 vehicles and vans. This device uses the vehicle’s central locking system and is very efficient in providing security to the vehicle. The central locking system synchronizes the locking of the tailgate with the locking of the other gates or doors of the vehicles. This locking system ensures that the tailgate gets locked at the same time as that of the other doors.

The Japan based automobile manufacturer Mitsubishi is also an eminent manufacturer of some truckloks. The Mitsubishi trucklok is one of the hardy and most used truckloks worldwide. Mitsubishi trucklok provides protection and locking of the highest degree and ensures that no negligence takes place once you have activated the central locking system of your vehicle. Mitsubishi trucklok goes best with vehicles of Mitsubishi. However it can be fitted with cars of other brands too.

                Installing a trucklok is not a matter of headache at all. Further no drilling is necessary and it does not affect the looks of your vehicle. A trucklok can be installed within a span of thirty minutes. The installation of the trucklok should be done at authorized service centers as this is a matter of the vehicle’s security. So if you are not having one of from the lot, go get yourself a brand new one and get a Mitsubishi trucklok for best results thereby ensuring safety of your coveted vehicle.

Post Navigation

%d bloggers like this: